Description
VERSATILE SELF PRIMING CENTRIFUGAL TRASH PUMPS
The Trash Flow TFCC Series features a large volute design and enhanced re-priming capabilities. TFCC pumps are designed for municipal wastewater pumping and industrial solids handling. Solids handling capabilities up to 3”.
MOUNT YOUR TRASH PUMP THE WAY YOU NEED IT
Direct drive, close coupled, belt driven, trailer mounted or sewage lift station models available for every wet prime pump model we manufacture.
EASY MAINTENANCE, LONG LIFE CYCLES
Trash Flow components can be adjusted and replaced to renew pump performance. No disassembly or shim requirements are necessary.
BACK PULL-OUT DESIGN
The Trash Flow’s back pull-out design enables maintenance staff to quickly service the pump safely without the need for special tools.
Clean-Out Port
Operators can easily inspect and service the clean-out without draining the pump casing.
QUICK DELIVERY SCHEDULE
Wastecorp Trash Flow pump products are available within 3-6 weeks for standard self priming products. Custom pump configurations may require longer lead times.
ISO 9001 CERTIFIED TRASH PUMP MANUFACTURER
Wastecorp adheres to the highest quality pump manufacturing and reduced environmental regulations. The Trash Flow is ISO 9001 and ISO 14001 certified. The best part is, your Trash Flow is manufactured close to home.
Did you Know?
In Freeport Maine, the TFCC-4 Series trash pump transfers thousands of gallons of clean water at a bottling company everyday.
Specifications
Standard Features
Mounting
Skid Mounted, Trailer Mounted, Sewage Lift Station, Above Ground Lift Station, Below Ground Lift Station, Auto-Start Lift Station
Standard Connection Type
ANSI #150 Flanged
Optional Features
Optional Drives
Flex Coupled, Belt Driven (Horizontal, Piggy Back), Engine Driven, Air, Hydraulic
Pump Specifications
Approx. Pump Operating Speed
650-1950 RPM
Max. Discharge Head
110' (48 psi)
Max. Liquid Temperature
160°F (71°C)
Max. Operating Pressure
86 psi
Performance Range - Max. Capacity
740 GPM
Power Transmission
Belt Driven Vertical
Pump Specifications - Suction/Discharge Size
4"
Pump Weight (Approx.)
600 lbs
Materials of Construction
Bearing Housing
Grey Iron, ASTM A48; Class 30
Cover Plate
Grey Iron, ASTM A48; Class 30
Flapper Valves
Neoprene (w/ Steel Reinforcing Ring)
Impeller
Ductile Iron ASTM A536, Grade 60-40-18 (Max. 9.75” OD)
Impeller Shaft
AISI 4140 HT
Pump Castings
Grey Iron, ASTM A48; Class 30
Seal Plate
Grey Iron, ASTM A48; Class 30
Wear Plate
SAE 1020 Steel
