Sludge Master PE 81/941

PE 81/941 Simplex Plunger Pump

 PE 941 plunger pumps transfer wastewater and sewage up to 90 GPM and up to 100' of head.

  • 9" Plunger Dia.
  • 180 ft. Head
  • 90 GPM


The PE Series features the ultimate in heavy duty components designed for a long life cycle. With heavy duty bearings, Class 40 castings and 160,000 psi strength shafts no other sewage pump compare.

Packing Options

Keep it clean with Wastecorp’s advanced technology packing materials available in graphite flax, Plunger Pac with urethane cup, braided Kevlar and Teflon materials for a superior seal around the plunger. Sewage and sludge stays in its place and the pump requires less maintenance.


Single or Dual Ball Valve Configurations

Sludge Master Plunger Pumps are available in single or dual ball valve configurations. Select a single ball valve configuration for applications like average sewage pumping applications. Also ideal for facilities with a grinder or a screening system. If your WWTP has over 18% solids handling requirements then the dual ball valve configuration will help transfer higher concentrations of abrasives and solids

 

Shafting Material

Sludge Master Plunger Pump shafts are designed to last. With advanced materials and innovative finishing processes, Wastecorp pump shafts can last between 5-50 years or more of service.

 

Start Up Services

Get the factory training for your operators they deserve. When you order your new Sludge Master Plunger Pump make sure you add start up services. A trained Wastecorp technician arrives at your facility walks your staff through the safe and effective operation of your new pump.

 

Lifecycle Support

Wastecorp Sludge Master Plunger Pumps are celebrating over 30 years of service. We provide parts and service support in most areas with parts available within 24 hours

Pump Specifications

Air Chambers
(2) 9"x30"
Ball Valves
5.125" Urethane with Centralized Iron Core
Driver Speed
1200 RPM (Belt Driven); 1800 RPM (Direct Drive)
Eccentric
ASTM A48, Class 35 Grey Iron
Eccentric Dia.
10"
Mainshaft
A4140/4142 High-Strength Alloy Steel
Max Stroke Length
6.56"
Max Strokes per Minute
50
Max. Flow Capacity
88 GPM
Max. Suction Lift
20'
No. of Pin Positions
11
Number of Plungers
1
Plunger
ASTM A48, Class 35 Grey Iron
Plunger Diameter
9"
Power Transmission
Constant Speed, Helical horizontal Gearmotor coupled to pump’s mainshaft, Max. Output Speed: 50 RPM
Pump Weight (Approx.)
1200 lbs
Suction/Discharge Size
4"
Total Head
180'

Standard Features

Standard Connection Type
ANSI #125 Flanged

Optional Features

Optional Drives
a) Constant Speed, Helical Shaft-Mounted vertical Gearmotor (vertical), b) V-Belt/Gear/Pulley System, c) Mechanical Variable Speed Drives, d) Variable Frequency Drives
Get A Quote

Get A Quote



This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.