Dry Prime Pumps Strengthen Bypass Operations at WWTP

Water and Wastewater treatment facilities across the country are undergoing unprecedented upgrades to their pump systems and infrastructure. During construction when new piping, digesters, lagoon refurbishment and systems updates are being completed, water and wastewater must continue to be pumped and treated for surrounding communities. A Maine wastewater treatment plant recently experienced this situation. During a $10,000,000 secondary wastewater treatment upgrade Wright Pierce Environmental Engineers and US based public works contractor Penta Corporation worked with Wastecorp Pumps to specify a Trash Flow Dry Prime TFV-6 dry prime pump. This diesel driven dry prime pump can transfer up to 3400 GPM with up to 200 ft. of TDH. The TFV-6 can transfer up to 3” solids with a semi-open non-clog impeller.

Wastecorp conducted an in depth pump training and start up program with the facility staff, Wright Pierce and Penta. Included in the pump spec was the use of float switches which allows the facility to operate the pump with limited staff involvement on a 24 hour schedule. The float switches are secured inside one of the facilities wastewater intake areas where the high, low and alarm floats are secured. This is especially helpful  for pumping after hours,  heavy rain or snow and normal use of the city’s wastewater
sewage system. All the pump operator has to do is  position the floats where desired and select auto run on the control panel to activate the automated pump out function.

Dry Prime Pumps Strengthen Bypass Operations at WWTP

The TFV-6 features a 74 hp tier 4 final diesel engine. Engines are available from Deutz, Caterpillar and John Deere. This powerful engine assists in pumping out
manholes around the community, flooded roadways, lagoons, digesters and general
wastewater pumping tasks.

Wastecorp manufactures the TFV-6 with a DOT compliant trailer system with available hydraulic surge brakes, lifting bail and LED lighting
system  with The TFV -6 includes a vacuum compound gauge and a pressure gauge which provide on demand information to the pump operator concerning suction and discharge values. A hose strainer assists in separating larger rags, disposable wipes and other solids from the pump operation enhancing pump productivity.

Wastecorp is a proud partner with environmental engineers, contractors and public works operators in achieving their pump goals. Wastecorp provided all non-collapsible hosing, couplings, floats and accessories to the engineer and contractor so the pump could be
quickly placed into dry prime pump

Dry Prime Pumps Strengthen Bypass Operations at WWTP 1
Trash Flow TFV-6 dry prime pump start up and training by Wastecorp. Training includes how to operate the pump, connecting hoses and maintenance procedures

 

Dry Prime Pumps Strengthen Bypass Operations at WWTP 2
Floats with an automated start/stop function wired into the control panel allows pump operators to activate the pump and turn it off when tank levels reach pre-determined levels.

 

Dry Prime Pumps Strengthen Bypass Operations at WWTP 3
Massive Hoses With Camlocks to connect multiple lengths of hose quickly and productively

 

Dry Prime Pumps Strengthen Bypass Operations at WWTP 4
6″ pump strainer was specified for this bypass project. This reduces the chances that rags, sticks, stringy material and other debris with enter the pump.
Dry Prime Pumps Strengthen Bypass Operations at WWTP 5
The Trash Flow pumping municipal wastewater during a bypass operation from digesters to a settling lagoon.

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *